RAU worktable electrically height-adjustable 1000x1000x720-1120 mm linoleum top

Worktop with linoleum/universal covering, thickness 25, top side with a 2.0 thick, soft and light gray marbled universal/linoleum covering. Antistatic, fungicidal, bacteriostatic, splash-proof, dirt-resistant, temperature-resistant. Largely resistant to acids, oils, greases, solvents and chemicals. Sensitive to alkalis with a pH value above 9 (, aoniak). Covering flame-retardant (B1) in accordance with DIN 4102. Chipboard core in accordance with EN 309 / EN 312 (emission class E1). Underside with backing. Light gray, antistatic ABS edge on all sides. System substructure, W990 x D950 x H700-1100 .2 lifting columns (50x80 , tested in accordance with EN 60335-1) including control unit and connection cable with plug. Skids made of profile steel tube (60x30x3 ) including leveling feet. Complete frame made of profile steel tube (steel tube 50x25x2.5 ) at the top under the worktop. Control element with up/down button. Electric adjustment using the 2 lifting columns with integrated linear drive. Low-noise, stepless and absolutely synchronous adjustment of the working height, even with asymmetrical loads. Adjustment travel 38 /s (without load). Duty cycle 10 % (6 minutes per hour or 2 minutes continuous operation at full load). Power consumption in standby mode only 0.1 W. CE Declaration of Conformity: The product complies with the essential requirements set out in the following harmonization legislation: a) Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. b) Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility // The following harmonized standards were applied: a) DIN EN ISO 1210:2011-03 Safety of machinery - General principles for design - Risk assessment and risk reduction. b) DIN EN 1570-1 Safety requirements for lifting tables - Part 1 (except chapters 5.5.5, 5.6.11 and 5.10). Note: The system can optionally be operated independently via a battery box (accessory) so that no permanent connection to a power supply is required.