ATORN collet chuck BT40 (ISO 7388-2) ER32 A=160 mm
Brand: ATORN
Art.-no. ZA23296575
Manufacturer article no. 22660573
EAN 4050293709889
Application
For clamping tools with a straight shank in ER collets in accordance with DIN 6499.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
- Functional surfaces precision-ground, all other surfaces black-oxide
- With Balluff chip hole
- Required pull studs no. 23690 and collets no. 23320
Notes
The previous standard JIS B 6339 MAS BT was superseded by ISO 7388-2.
Delivery
1x BT40 ER collet chuck (ISO 7388-2).
 | |
Brand | ATORN |
EAN | 4050293709889 |
Manufacturer Part Number | 22660573 |
Tool holding device | BT 40 |
Collet type | ER 32 |
Min./max. clamping range (Spannweite min./max.. d) | 2-20 mm |
Outer diameter (D) | 50 mm |
Projecting length (A) | 160 mm |
Clearance length to collar (L1) | 133 mm |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661020 |
Gross Weight | 2.630 kg |
Last viewed
MILWAUKEE Wide chisel 21 mm HEX 300X75 mm 4932479217
ATORN countersink, 90°, HSS, T=3, 12.4 x 56 mm, 3-flat shank
ORION SC-TiAlN cutt insrt f. index. insert drill 11213-11217, 20.9 mm, 130°
PFERD flap wheel, CO-COOL ceramic abrasive grain, 60 x 30 mm, G 60, dia. 6 mm
ORION collet chuck 173E (F48) DIN 6343 RD 7.0 mm smooth
ATORN insert holder A mm-R 2525-00 degrees for module AM..-R-25
ATORN test pin corrosion and acid resistant TC1 1.69 mm x 70 mm
ATORN indexable insert, positive, VCGT 070204-MN HW 6315
ACTION Power socket joint 3/8 inch SW 10 mm DO1038-4-010
MAKITA thermoformed part for MAKPAC size 1 837866-3