3M Structural Adhesive 200ml with 2 nozzles 1 brush Purple/Silver 07333 7100273723

3M (TM) Structural Adhesive (IRSA) is specifically designed for OEM requirements, with increased impact resistance requirements. This two-component epoxy adhesive offers an extended open time - up to one hour - and can be accelerated cured with heat. The adhesive changes color from silver to purple as it cures. 3M (TM) Structural Adhesive (IRSA) is designed to withstand higher stresses than conventional adhesives and is ideal for OEM-specified automotive structural applications. It adheres to properly prepared steel, aluminum and carbon fiber surfaces; this is of paramount importance as OEMs strive for high strength in increasingly lightweight structures. This two-component epoxy adhesive is recommended for all welded and riveted joints when specified by an OEM. It offers an extended open time - up to one hour - and cures quickly when exposed to heat (30 minutes at 80 °C). When applied, this adhesive is silver in color; as curing begins, the color changes to purple, indicating the start of the curing process. 3M (TM) Structural Adhesive is designed to absorb collision energies and provides increased torsional stiffness for OEM specified vehicle structures. It allows spot welding in an uncured state, typically up to three hours after application. Properly applied adhesive seals joints completely and does not exhibit any performance degradation even at very high or very low temperatures. 3M (TM) Structural Adhesive is available in 200 ml cartridges.