3M Cushion-Mount (TM) plate mounting tape B1920 Pink 457 mm x 33 m 7100247165

The 3M (TM) Cushion-Mount (TM) Plus plate mounting tape B1920 is used for mounting flexographic printing plates on cylinders or sleeves, especially when small batches need to be produced as cost-effectively as possible or when frequent plate changes are required. This pink, adhesive foam tape for plate mounting offers high-quality, medium-light combination printing. Bubble-free mounting of flexographic printing plates The 3M (TM) Cushion-Mount (TM) Plus plate mounting tape B1920 features 3M (TM) Comply (TM) bonding system technology, which allows air to escape on the plate side. This enables easy application with virtually no air bubbles and a more consistent print quality. This 0.51mm thick, double-sided, medium density pink foam tape is ideal for high quality medium density combination printing and securely bonds the flexo photopolymer plate to the printing sleeve or steel cylinder to prevent plate edge delamination during printing. This flexo plate mounting tape has no reinforcement layer, so it can expand and contract on thin-walled sleeves, which also helps to reduce air bubbles. The 3M (TM) Cushion-Mount (TM) Plus plate mounting tape B1920 is equipped with technical acrylic adhesives for 20-mil applications. The adhesive on the side with protective film (facing the cliché) has been specially developed for mounting photopolymer plates. The adhesive on the side without protective film (sleeve/cylinder) is intended for mounting on flexographic printing cylinders or sleeves. Easy mounting without air pockets In contrast to flat or textured liners, the B-series liners have a diamond-shaped grid pattern. This creates special micro-channels in the adhesive that allow air to flow through the adhesive. Air bubbles disappear between the adhesive tape and the plate, resulting in virtually bubble-free plate mounting. Shorter set-up times and smoother surfaces ensure cleaner print quality and higher productivity. The adhesive prevents peeling at the edges. About mounting tapes for flexographic printing plates 3M mounting tapes for flexographic printing plates are special tapes with very low thickness tolerances, allowing flexographic printers to use tapes from different production lots without compromising registration accuracy. The compressible foam can withstand long and fast print runs Running presses mean satisfied customers For decades, 3M products have been used in paper mills and printing plants, contributing to higher product quality and work efficiency. From endless gluing of paper webs to plate mounting and packaging of the finished product, you can rely on 3M solutions and services.